HEATING & COOLING
SALES - SERVICES - INSTALLATION
40 Prince St, New York, NY 10012
Should you need assistance,
please call
our Customer Service Department.
Tel: (718)395-5666, (718) 674-6606
Email : AC@PTAC.NYC
You can also use our contact us form
to send a message
to the appropriate department.
http://ptac.nyc/
Air Conditioning Repair and Service
- Before repairing, a Pre-inspection check is done.
- We use the latest tools to repair the PTAC units.
- We provide repairing services at business hours without any obstruction.
- We take care of customer privacy and safety.
- We make sure to maintain proper hygiene after repairs.
Which are the Best Weather Conditions for PTAC Systems?
The areas where weather changes frequently are considered to be the best for Packaged Terminal Air Conditioner units. New York is one such place because it experiences hot summers and freezing winters. Hence, installing a PTAC system in New York will help your place to reach an optimum temperature without consuming much energy.
PTAC systems are the best option for companies with high customer rush. This is because such places experience a rush of customers and staff altogether. Hence, to provide a good working environment for the staff and a quality experience to the customers, a PTAC system is your go-to option. PTAC units provide hassle-free air conditioning in commercial places.
PTAC units are ideal to provide indoor cooling in places such as hotels, restaurants, boutiques, gymnasiums, apartments, offices, etc.
Areas we provide quick PTAC System Repairs are:
- Brooklyn
- Queens
- Manhattan
- New Jersey
- Bronx
If there is a PTAC system installed at your establishment and you are facing any issues, contact New York Air Conditioning Services to get it repaired by the experts. Our technicians provide a lightning-fast service for all types of PTAC issues.
The services that we provide are
- PTAC Machinery breakdowns
- PTAC quick repair
- PTAC system installation
- PTAC system health check
- PTAC emergency repairs
- PTAC unit repairs
If you are experiencing any issue with your PTAC unit, we are ready to help.
Our company has years of experience in repairing and installing PTAC units in NYC. we make sure to provide a hassle-free service to our customers for any type of PTAC needs.
Schedule a Visit for New York Air Conditioning Services Today
If your PTAC system has any problem, it might get completely damaged in no time. So, don’t think too much about repairing your PTAC unit. Contact New York Air Conditioning Services and schedule a visit for the earliest repair. You can contact us by calling anytime throughout the day.
Our technicians are on call during most hours of the day ready to provide services in NYC from Manhattan to the Bronx.
It is an easy task to schedule a visit with New York Air Conditioning Services. You just have to dial our number and ask for a time slot. We will provide you with a time slot as per your convenience. Our technicians will reach out to you as early as possible and fix the issues with your PTAC unit quickly.
We provide all kinds of solutions to the PTAC unit problems, such as replacing old PTAC units, installing new units, repairing defunct units etc., that you may be facing.
Premier PTAC Repair and Installation Services in New York City
Our company is a reliable brand for various organisations for PTAC solutions throughout NYC. Businesses trust New York Air Conditioning Services for premium indoor comfort. In the beginning, our services were limited to Manhattan and the Bronx. Now, we have expanded to other parts of New York as well because of our. high-quality service.
The business establishments in New York require a PTAC system working at all hours because of the extremely hot summers and freezing winters. New York Air Conditioning Services is one of the most trusted service providers to ensure that their businesses don't suffer due to any technical issue.
Schedule an appointment with PTAC Hi-tech now, to get a quick visit and service from the experts. There are several slots available throughout the day due to the rotational working hours which makes it easy to reach out to us. Hence, contact us for a quick and easy to schedule an appointment.
Emergency PTAC Repair Service New York
PTAC emergencies can be a real challenge when a problem occurs at peak hours experiencing high customer volume. Such situations are very difficult to deal with. In such scenarios, you pray for a miracle to take place, but New York Air Conditioning Services is all you need.
Customers can schedule emergency on-demand PTAC services to overcome the PTAC problem and avoid any loss in the business. Our technicians are capable of dealing with all kinds of emergencies and provide quick service to resolve the PTAC issue that you are facing. Thus, helping your business to resume the normal pace in minimum time.
So if you are not able to get PTAC service at your location, contact us. We provide our services to all locations giving the best possible solutions and ensure that you do not face the same problem again. We provide all kinds of quick repairs, ad-hoc fixes, PTAC replacement and impromptu adjustments to keep your PTAC system running perfectly.
Let no PTAC emergency let you stop from serving your customers!
Common HVAC / PTAC / Air Condition Terms
Air Handler, or Air Handling Unit (AH) or (AHU)
- Central unit consisting of a blower, heating and cooling elements, filter racks or chamber, dampers, humidifier, and other central equipment in direct contact with the airflow. This does not include the ductwork through the building. (Inside unit)
British Thermal Unit (BTU)
- Any of several units of energy (heat) in the HVAC industry, each slightly more than 1 kJ. One BTU is the energy required to raise one pound of water one degree Fahrenheit, but the many different types of BTU are based on different interpretations of this “definition”. In the United States the power of HVAC systems (the rate of cooling and dehumidifying or heating) is sometimes expressed in BTU/hour instead of watts.
Chiller
- A device that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. This cooled liquid flows through pipes in a building and passes through coils in air handlers, fan-coil units, or other systems, cooling and usually dehumidifying the air in the building. Chillers are of two types; air-cooled or water-cooled. Air-cooled chillers are usually outside and consist of condenser coils cooled by fan-driven air. Water-cooled chillers are usually inside a building, and heat from these chillers is carried by recirculating water to outdoor cooling towers.
Coil
- Equipment that performs heat transfer when mounted inside an Air Handling unit or ductwork. It is heated or cooled by electrical means or by circulating liquid or steam within it. Air flowing across it is heated or cooled.
Condenser
- A component in the basic refrigeration cycle that ejects or removes heat from the system. The condenser is the hot side of an air conditioner or heat pump. Condensers are heat exchangers, and can transfer heat to air or to an intermediate fluid (such as water or an aqueous solution of ethylene glycol) to carry heat to a distant sink, such as ground (earth sink), a body of water, or air (as with cooling towers). (Outside unit)
Constant Air Volume (CAV)
- A system designed to provide a constant air volume per unit time. This term is applied to HVAC systems that have variable supply-air temperature but constant air flow rates. Most residential forced-air systems are small CAV systems with on/off control.
Controller
- A device that controls the operation of part or all of a system. It may simply turn a device on and off, or it may more subtly modulate burners, compressors, pumps, valves, fans, dampers, and the like. Most controllers are automatic but have user input such as temperature set points, e.g. a thermostat. Controls may be analog, or digital, or pneumatic, or a combination of these.
Damper
- A plate or gate placed in a duct to control air flow by introducing a constriction in the duct.
Evaporator
- A component in the basic refrigeration cycle that absorbs or adds heat to the system. Evaporators can be used to absorb heat from air (by reducing temperature and by removing water) or from a liquid. The evaporator is the cold side of an air conditioner or heat pump.
Fan-Coil Unit (FCU)
- A small terminal unit that is often composed of only a blower and a heating and/or cooling coil (heat exchanger), as is often used in hotels, condominiums, or apartments. One type of fan coil unit is a unit ventilator.
Fresh Air Intake (FAI)
- An opening through which outside air is drawn into the building. This may be to replace air in the building that has been exhausted by the ventilation system, or to provide fresh air for combustion of fuel.
Furnace
- A component of an HVAC system that adds heat to air or an intermediate fluid by burning fuel (natural gas, oil, propane, butane, or other flammable substances) in a heat exchanger.
Grille
- A facing across a duct opening, usually rectangular is shape, containing multiple parallel slots through which air may be delivered or withdrawn from a ventilated space.
Heat Load, Heat Loss, or Heat Gain
- Terms for the amount of heating (heat loss) or cooling (heat gain) needed to maintain desired temperatures and humidities in controlled air. Regardless of how well-insulated and sealed a building is, buildings gain heat from warm air or sunlight or lose heat to cold air and by radiation. Engineers use a heat load calculation to determine the HVAC needs of the space being cooled or heated.
Louvers
- Blades, sometimes adjustable, placed in ducts or duct entries to control the volume of air flow. The term may also refer to blades in a rectangular frame placed in doors or walls to permit the movement of air.
Makeup Air Unit (MAU)
- An air handler that conditions 100% outside air. MAUs are typically used in industrial or commercial settings, or in once- through (blower sections that only blow air one-way into the building), low flow (air handling systems that blow air at a low flow rate), or primary-secondary (air handling systems that have an air handler or rooftop unit connected to an add-on makeup unit or hood) commercial HVAC systems.
Packaged Terminal Air Conditioner (PTAC)
- An air conditioner and heater combined into a single, electrically-powered unit, typically installed through a wall and often found in hotels.
Roof-Top Unit (RTU)
- An air-handling unit, defined as either “recirculating” or “once-through” design, made specifically for outdoor installation. They most often include, internally, their own heating and cooling devices. RTUs are very common in some regions, particularly in single-story commercial buildings.
Thermal Zone
- A single or group of neighboring indoor spaces that the HVAC designer expects will have similar thermal loads. Building codes may require zoning to save energy in commercial buildings. Zones are defined in the building to reduce the number of HVAC subsystems, and thus initial cost. For example, for perimeter offices, rather than one zone for each office, all offices facing west can be combined into one zone. Small residences typically have only one conditioned thermal zone, plus unconditioned spaces such as unconditioned garages, attics, and crawlspaces, and unconditioned basements.
Variable Air Volume (VAV) System
- An HVAC system that has a stable supply-air temperature, and varies the air flow rate to meet the temperature requirements. Compared to CAV systems, these systems waste less energy through unnecessarily-high fan speeds. Most new commercial buildings have VAV systems.
